ULA FORCE SL SPOOL AZURE

Use the force. Even lighter than the original, the Force SL Series II breaks its own record as the lightest machined reel on the market. This evolution in the Force Superlight reel line includes an even larger arbor to increase line recovery and decrease weight. It also has improved structural development made with CNC machining and a more fluid and refined style. Since they burst onto the scene in 1997, Force reels have pursued what we believe is the holy grail of fly reel performance: offering the highest possible ratio of retrieve speed to reel weight. To that end, while other Super Arbor reels add weight to gain speed, Force reels maintain their featherweight specs by being pure muscle and bones.

- Format: Large Pergola

- Materials: Machined 6061 Aluminum, Stainless Steel

- Finish: Hard Alox

- Drag: Sealed conical drag system

- Made in the USA, built in Idaho

RECOMMENDED CARE:

1) Do not under any circumstances remove the drag knob or the two-hole nut in the center of the drag knob.

2) Always make sure that the packing cap is tight, especially before using the reel for the first time or after reversing the recovery direction. Be sure to periodically check that the cap is securely inserted; It must always be tightened firmly by hand, do not use a tool. If installed correctly, the packing plug should be seated fully on the drive cylinder.

3) The drive system is designed to operate without lubrication. Do not use any type of oil or lubricant in or around the drag system. You can apply a small amount of WD-40 to the recovery handle to remove any dirt buildup between the handle and the handle shaft.

4) Fresh Water Use: Occasionally rinse the reel thoroughly under fresh running water and clean the spool and frame to remove any debris or dirt buildup. Be sure to clean the spool pin and keep it free of debris.

Saltwater Use: Be sure to rinse your reel under fresh running water after each use in a salty environment. Occasionally, flush the clutch by doing the following:

1) Remove the coil, unscrew the packing cap and remove the red and silver clutch assembly.

2) Thoroughly rinse all components, including the inside of the drive cylinder, with fresh running water.

3) Allow all components to dry completely before reassembling them.